2" Gas Powered Water Transfer Pump, 7.5 HP 212cc 4 Stroke Water Pump 6868GPH Gasoline Water Pond Pumps High-Pressure Gasoline Transfer Pumps with 24.6ft Water Pipe for Pond Draining Irrigation

Application:This product is widely used for water well intake, farmland irrigation, garden irrigation, greenhouse planting, field water, fire water, ground cleaning, drainage, pool water exchange, etc.How to Use:1.Place the machine flat and fill it with engine oil. Just enough for oil to drip out, too much or too little engine oil will affect the operation.2.Add 90 # or above gasoline.3.Fill the pump head with water until water overflows from the outlet.4.Turn the red shutdown switch upwards to the "ON" position.5.Connect the inlet pipe.6.Connect the water outlet.7.Adjust the throttle switch to the left, adjust the air vent to the left, and adjust the oil circuit switch to the right.8.First, pull out a small section of the rope and then quickly pull the rope to start the machine.Specification:Material: Aluminum Alloy, Carbon Steel, Cast Iron, Titanium Alloy Stainless SteelColor: Red, BlackProcess: Die-casting, StampingStyle: ModernMounting Type: Free StandingFuel Type: 90# And Above GasolineIgnition Method: Contactless Transistor IgnitionStartup Method: Manual Startup Engine Type: Single Cylinder, 4-stroke, Air-cooled Power: 7.5HP Speed: 3600rpmConnection Dia.: 50mm/2inTotal Head: 30m/98.4ftFuel Consumption: 365ml/12.3OZDelivery Volume: 26m³/ 6868GPHSuction Height: 7m/ 23ftFuel Tank Capacity: 3.6L/ 0.95GalOil Capacity: 0.6 L/ 0.16GalDisplacement: 212ccRunning Time: 5HApplicable Water Temperature: -5~40℃/23~104℉Noise Level: 66dBWater Pipe Length: 7.5m/24.6ftProduct Size: 49*37.5*40.5cm/19.29*14.76*15.95inPackage Size: 50.5*38.5*43cm/19.88*15.16*16.93inGross Weight: 21kg/46.3lbsNet Weight: 19.95kg/43.98lbsPackage Included:1* Gasoline Engine Water Pump1* English Manual1* Water PipeOther Accessories for AssemblyNotes:Please read the operating manual completely before use. And pay particular attention to the safety instructions included.The first use of the break-in period is 5-10 hours, and the engine oil needs to be changed, otherwise, impurities in the engine oil during the break-in period will jam the crankshaft.

• ★Made to Las - High-class aluminum alloy, carbon steel, cast iron, and titanium alloy stainless steel with exquisite die-casting and stamping processes make this product sturdy, scratch-resistant, impact-resistant, and not easy to deform, ensuring a long service life.
• ★High-efficiency Pumping - A 7.5HP 4-stroke gasoline engine can provide strong power output with a flow rate of up to 6868GPH, which ensures efficient pumping.
• ★Excellent Performanc - 98.4ft head and 23ft suction height allow you to easily complete irrigation, drainage, and other tasks, greatly saving time and labor.
• ★Long Running Time - The 0.95Gal fuel tank capacity eliminates the need for frequent refueling and can be used continuously for 5 hours, thereby improving work efficiency and saving time.
• ★High Safety - The product's impeller ensures a good seal when handling particles up to 1/3 inch in diameter, reducing the risk of clogging and thus increasing safety in use.