Bundle of BIG RED ATRLY2003R Torin Trailer Hitch Mount and Ball: 6,000 lb Capacity + BIG RED Hitch Tightener and Heavy Duty Anti-Rattle Stabilizer: Made of Carbon Steel for 1.25" and 2" Hitches

The trailer hitch mount and ball delivers dependability for your towing setup, rated to tow 3 tons (6,000 lbs) gross trailer weight and 750 pounds tongue weight. Constructed of heavy duty steel and protected with a powder coat finish. The trailer ball has a polished chrome plating to prevent corrosion. Easy to be installed, simply insert the shank into your vehicle's 2" hitch receiver then connect the two vehicles with the trailer ball. Ball mount has a 2" drop. Ball's diameter measures 2". Pin hole is 5/8". Measures 8-1/4" overall length.This tow clamp is perfect for locking 1. 25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. High-Strength Anti-Rust U-Bolt with Rubber Isolator and Tightener Plate, 1 Rubber Isolator, 2 Spring Lock Washers, 2 Flat Washers, 4 Locking Nuts, All the Parts of Surface was Covered By Galvanize & Powder CoatedCan help to decrease noise and give you a quiet world when towing. Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. Follow the picture to install it and also can be mounted from the bottom. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom. Use on ball mounts, drop hitches, hitch adapters, hitch extenders and other trailer accessories. Spring lock washers and flat washers help to tightening it in place and secure.

• Trailer hitch mount and ball delivers dependability for your towing setup, rated to tow 6,000 lbs gross trailer weight and 600 pounds tongue weight
• Super Quality: Heavy-Duty Forged Steel Ensures Eliminate of Wobble, Rattle & Noise, Provide a Quiet and Stable Towing & Hauling Experience
• Constructed of heavy duty steel and protected with a powder coat finish; Trailer ball has a polished chrome plating to prevent corrosion
• Compatibility: Easily Installs with Class I, II, III or IV (1, 2, 3 or 4) Trailer Hitches and Suitable For 1.25 and 2 Inch Hitch Receivers, Help To Tightening It In Place and Secure
• Easy to be installed, simply insert the shank into your vehicle's 2" hitch receiver then connect the two vehicles with the trailer ball
• Intended Use: Stable Locked Down Hitches Stabilizer Fits for Variety Off-road Vehicles, Trailer Hitch Receiver, Trailer Ball Mounts, Bike Racks, Hitch Racks, Etc
• Ball mount has a 2" drop; Ball's diameter measures 2"; Pin hole is 5/8"
• Fitted Suite: High-Strength Anti-Rust U-Bolt with Rubber Isolator and Tightener Plate, 1 Rubber Isolator, 2 Spring Lock Washers, 2 Flat Washers, 4 Locking Nuts, All the Parts of Surface was Covered By Galvanize & Powder Coated
• Measures 8-1/4" overall length; Includes a limited 1 year manufacturer warranty
• Suitable for trailer truck SUV sedan RV camper van and minivan.Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc.